Ebara - Best 4M Manual Submersible Pump - Without Float Switch - 230V

Ebara Best submersible pumps are suitable for draining wells, garages, cellars or places subject to flooding, feeding of garden fountains, easy emptying of tubs and tanks.

Specifications
• Maximum liquid temperature: 50°C
• Maximum immersion depth: 10 Metres
• Maximum soft solids: 10 mm
• Outlet: 1-1/2" B.S.P.

Female
• Power cable: 10 Metres
• 230V pumps are fitted with UK 3 pin plug

Materials
• Pump body: AISI 304 Stainless Steel
• Impeller: AISI 304 Stainless Steel

The Ebara - Best 4 M Manual Submersible Pump - Without Float Switch is a Submersible pump entirely in AISI 304 Stainless Steel, with double mechanical seal in oil chamber.
Practical and easy to use, BEST 2-5 electric pumps are also offered with float, thus increasing their versatility of use.
For further technical information see the datasheet

Suitability:

• Handling of seepage liquid
• Emptying of basements, garages, cellars
• Drainage of small and medium-sized construction, sites

Real-world product applications

• Removing water from pits, sumps, and collection points
• Supporting drainage and water transfer duties
• Dewatering flooded areas and low-lying spaces
• Transferring water from tanks and containers
• Assisting with general submersible pumping tasks

Key Product Features

• Flow Rate (Actual): 330 Ltr/min
• Max Head: 18m
• Voltage: 230V
• Possibility to use in fixed and mobile installations

Product Range Technical Data:

• Flow rate: from 1.2 to 21.6 m³/h
• Total head: from 2.9 to 18.4 m
• Max. temperature of the liquid: +35°C
• Poles: 2
• Max. solids passage: 10 mm
• Insulation class: F
• Protection degree: IP68
• Voltage: Single-phase 1~230V ±10%
• Three-phase 3~400 ±10%
• Max. immersion: 7 m with 10 m cable

Materials Spec:

• Pump body: Stainless Steel AISI 304 (EN 1.4301)
• Impeller: Stainless Steel AISI 304 (EN 1.4301)
• Shaft: Stainless Steel AISI 303 (EN 1.4305) (part in contact with liquid)
• Mechanical seal: upper part in Carbon/Ceramic/NBR (motor side)
• lower part in Silicon Carbide/NBR (pump side)

Ebara Pumps est. 1912, deliver highly engineered pumping technology trusted worldwide for water handling, pressure boosting, HVAC circulation, drainage and demanding industrial/commercial duties. Built around precision manufacturing and proven hydraulic design, Ebara's range spans stainless steel and cast-iron centrifugal pumps, multistage systems, submersible drainage and wastewater pumps, and complete booster solutions. The end result is dependable performance, efficient operation and long service life.