Integrated Booster Setup (CAT5) iBOOST CAT 5 liquid pressurisation and flow boosting systems feature a weir overflow making them suitable for use in commercial applications where the risk of back flow contamination from Category 5 fluids exists.

Mains Liquid Boosting Setup The MAINSBOOST MB 450SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 bar.

MAINSBOOST Insulation Jacket MAINSBOOST Insulation Jackets are tailor made to ensure a perfect fit and protect MAINSBOOST vessels from extremes of hot and cold temperatures, ensuring the potable liquid stored within the MAINSBOOST vessel is at the perfect

The MAINSBOOST MB 450SV features a nominal vessel size of 450 Ltrs and a pressurised water holding capacity of approximately 248 Ltrs.

Mains Boost Unit Where vertical space is not an issue the MAINSBOOST vessel mounted Charger pump may be the answer.

Integrated Booster Setup Inadequate throughput rates and liquid pressure are common shortcomings for many properties, often resulting in underperforming showers and water using appliances.

The MAINSBOOST MB 100SV-1-22 features a nominal vessel size of 100 Ltrs and a pressurised water holding capacity of approximately 55 Ltrs.

The MAINSBOOST MB 100SV-2-22 features a nominal vessel size of 2x100 Ltrs and a pressurised water holding capacity of approximately 2x55 Ltrs.

The MAINSBOOST MB 100SV-3-22 features a nominal vessel size of 3x100 Ltrs and a pressurised water holding capacity of approximately 3x55 Ltrs.

Mains Liquid Boosting Setup The MAINSBOOST MB 130SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 bar.

The 2 vessel MAINSBOOST 130 Ltr vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water.

The 3 vessel MAINSBOOST 130 Ltr vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water.

Mains Liquid Boosting Setup The MAINSBOOST MB 200SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 bar.

The 2 vessel MAINSBOOST 200 Ltr vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water.

The 3 vessel MAINSBOOST 200 Ltr vertical steel system with 22 mm connections are installed directly onto the incoming water supply and under mains pressure fills with water.

Mains Liquid Boosting Setup The MAINSBOOST MB 250SV-1 is intended for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 bar.