Flamco - PressDS Plus 2160D Combined Degasser & Pressurisation Unit - Dual Pump - 8-16 Bar - 230V

Designed for sealed LPHW/CHW systems, the Flamco PressDS Plus 2160D integrates pressurisation, vacuum degassing and on-demand dosing to keep system pressure stable, remove dissolved gases and blend the correct additive mix during top-up.

Buy the Flamco PresDS Plus from Pumps Sales Direct and receive free standard delivery.

A compact, totally enclosed Twin Pump unit, it uses a digital processor to automate the sampleisolatevacuumventreintroduce cycle (with turbo mode for rapid commissioning). Top-up capacity is <18 L/min; an 18 Ltrs additive tank blends inhibitor at the point of fill. Guide system volume: up to 300,000 Ltrs.

• Category 5 protection (Type AB weir overflow)
• MODBUS RTU communications; password-protected access
• Mix ratios user-set from 150% via balancing valves
• Pressure setpoints in 0.1 Bar increments

Ideal for commercial plantrooms, the black (RAL 9005) enclosure includes sequential programming, system fill mode, pump-pulse, flood-protection routines and comprehensive event logging.

Real-world product applications

• Boosting water pressure to multiple outlets in a building
• Maintaining stable pressure where demand varies
• Supplying water from storage tanks to distribution pipework
• Supporting general water supply and transfer systems
• Assisting with pressure control in utility installations

Key Product Features

• Applications: commercial sealed heating & chilled water systems (guide ≤ 300,000 Ltrs)
• Functions: combined pressurisation, vacuum deaeration (turbo/normal) and additive dosing
• Dosing: on-demand blending at top-up; additive mix 150%; 18 Ltrs additive tank
• Hydraulics: top-up pressurisation < 18 L/min
• Pressure: operating 816 Bar; max delivery 16.0 Bar; set in 0.1 Bar steps
• Control: individual controllers for pressurisation and degassing; sequential programming; system fill mode; pump pulse option
• Comms:MODBUS RTU; password protection
• Protection: Fluid Protection Category 5 (Type AB weir overflow); flood protection (pump runtime limiter, excessive start alarm)
• Diagnostics: on-screen 12-month service reminder; additive-empty alert
• Event logging: alarm activations; pump run counter (per pump); cumulative run timer (hours/pump); electrical interruption
• Volt-free contacts (standard): Common Alarm (N/C), High Pressure (N/O), Low Pressure (N/O), Sensor Health (N/O), Pump 1 Health (N/O), Pump 2 Health (N/O)
• Optional VFCs: Low Pressure Warning (N/O), High Pressure Warning (N/O), Low Water in Break Tank (N/O), Low Additive in Holding Tank (N/O), Pump 1 Run for Top-up (N/O), Pump 2 Run for Top-up (N/O)
• Electrical: electric pump 230V 50Hz 1ph (2160D: 415V 50Hz 3ph)
• Construction/finish: compact, totally enclosed cabinet; black powder coat (RAL 9005)
• Operating pressure: 16 Bar.

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.