Koshin - Ponstar PXL-52511 Residue Puddle Pump - 110V - Single Phase - Manual

PXL Residue pumps also known as a puddle sucker pumps have the ability to pump water down to approx 1mm while the remaining flood water can be swept into the pump for removal.

Mostly of an alloy construction, Stainless Steel shaft. Equipped with non return valve on the suction of the pump to help stop any return of water.

Impeller and volute plate are made from a urethane rubber to give a longer life than the traditional Cast Iron. Outlet engineered so that it can be altered from vertical to horizontal (to stop that annoying kink in the hose)

Complete with internal check valve and has to be primed if using in shallow water.

Twin mechanical seals, carbon ceramic and silicon carbide in a lubricated chamber. Complete with 10 metres of power cable.

Can be applied with electronic control for automatic operation - See code 012-405 for 230v control or code 012-406 for 110v control

The Koshin Ponstar PXL-52511 Residue Puddle Pump - 110v - Single Phase - Manual is a Puddle Pump item. Voltage for this item is 110V.

Real-world product applications

• Dewatering areas such as pits, sumps, and low points
• Draining water from site works and excavations
• Removing unwanted water from tanks and containers
• Supporting general drainage and clean-up tasks
• Assisting with temporary water transfer

Key Product Features

• Water type: Dirty Water
• Voltage: 110V

Koshin (est. 1948) is a Japanese manufacturer of portable pumps, including petrol, diesel and electric models. Their ranges are commonly used for agriculture, irrigation, site drainage, emergency dewatering and general water transfer tasks.