Flamco - Twin System 2 X 225D Digital Pressurisation Unit - Electronic Transducer - 3 Bar - 230V

Flamco - Twin System 2 X 225D Digital Pressurisation Unit - Electronic Transducer - 3 Bar - 230V - 45062

Compact and totally enclosed digital pressurisation units with electronic pressure transducer and user-friendly microprocessor for use on sealed system in order to provide a minimum system pressure requirement.

The Flexfiller Twin System is a floor standing unit, ideal where space restrictions make it beneficial to locate two systems in a single enclosure. The system combines two peak-hydraulic demand flow conditions rate (<18 l/min) top-up pressurisation units and two controllers with a single 18 litre break tank.

Applications:

• Commercial
• Industrial
• Residential

Product Feature:

• For system volumes up to 300,000 litres per system.
• Fluid Protection Category 5 (AB Weir Overflow).
• System fill mode.
• Onscreen Service Reminder - 12 Months.
• Electric pump, 230V 50Hz 1ph.
• Colour: Black (RAL 9005).
• MODBUS RTU Communication Protocol.
• Password protected.
• Sequential programming menu.
• Pressure setting in 0.1 bar increments.
• Pump pulse option.
• Flood Protection (Pump Runtime Limiter, Excessive Start Alarm).
• Event logging: Alarm activations, Pump Run counter (activations per pump), Cumulative run timer (hours per pump), Electrical interruption.
• Volt free contacts: Common Alarm (N/C), High Pressure Alarm (N/O), Low Pressure Alarm (N/O), pressure sensor Health (N/O), Pump 1 Health (N/O), Pump 2 Health (N/O).

Real-world product applications

• Boosting water pressure to multiple outlets in a building
• Maintaining stable pressure where demand varies
• Supplying water from storage tanks to distribution pipework
• Supporting general water supply and transfer systems
• Assisting with pressure control in utility installations

Key Product Features

• Twin high-capacity digital pressurisation unit
• Electronic pressure transducer feedback
• Operates up to 3 bar. set pressure
• Enhanced flow for larger systems
• Designed for uptime and resilience
• Water type: Clean or Discoloured
• Voltage: 230V

Flamco (est. 1956) is a Dutch manufacturer of HVAC and plumbing system components, including expansion vessels, air separators and pressurisation accessories. Their ranges are used in heating and chilled-water circuits and potable water systems across domestic and commercial installations.